Set clutch parts 6-speed SMG (3.0)
plus Shipping Costs
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
Only applicable for M54 engine. If you are unsure, please contact us before purchasing.
We sell only Sachs or LUK components, both are original supplier for BMW.
- Condition: New
- Compatible vehicles: BMW E46, BMW E60, BMW Z4 E85
Pressure accumulator 6-speed SMG
Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with new nitrogen gas.
The accumulator is responsible to store the pressure of the SMG system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime permanently.
Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.
Control unit 6-speed SMG
The basic control unit (German “Steuergerät”, “SG”) is the main computer chip responsible for the control of the 6-speed SMG.
Please mind: the product photo is just a sample. The reference number of the delivered control unit may vary, the unit may need programming.
Clutch valve 6-speed SMG
The clutch solenoid valve (marked with “QPV”) is responsible for the clutch actuation of the SMG system. A faulty valve can cause problems while engaging the clutch (for example shuttering) and in consequence the car refuses to change gears.
This is an original and new Magneti Marelli spare part.
Transmission speed sensor 5- / 6-speed SMG
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
Pump motor 6-speed SMG
Pump relay 6-speed SMG E46
The pump relay is responsible to turn on / off the hydraulic pump of the SMG system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the clutch or change gears.
Pictures shown are for illustration purpose only. Fits only E46 models.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!