Pentosin CHF 11S
19,33 €
plus Shipping Costs
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
- Container size: 1.0 L
In stock
Related Products
Pump Motor BMW E60 M5 E63 M6 SMG III
This pump motor for the M5 and M6 SMG III is a high-quality replacement part, made in Germany, and specifically designed for the extreme demands of the SMG system. It is ideal for demanding drivers with a sporty driving style that involves frequent gear shifts and high stress on the system. The pump motor comes with the original connector, making it a plug & play replacement for the original part. The set includes not only the pump motor but also all the parts needed for the replacement:
- 4 seals
- 6 screws
- 4 cable ties
- 1 stainless steel clamp
- 1 metal coupling that connects the motor shaft to the gear pump
- 1 pack of lubricating grease
Hydraulic Pump Seal Kit BMW E46 M3 SMG II
- Seal kit for the hydraulic pump of the M3 SMG II
- Damaged or hardened seals may cause the pump to be unable to build up pressure
- Precisely fitting seals made of high-quality material
VANOS Timing Solenoid Valve BMW E60 M5 E63 M6
New solenoid valve for M5 / M6 VANOS system. There are 4 of these valves on the VANOS unit.
- Applies to SMG and manual gearbox
- Comes with a new o-ring for mounting.
Hydraulic Lines for Relocation Kit BMW E46 M3 SMG II
Time to solve your SMG problems once and for all! With the Relocation Kit you can relocate the SMG hydraulic unit – away from the engine to the passenger side's 'drug bin'.
This offer includes a set of 4 hydraulic lines with each 190cm length. The lines are made-in-Germany from braided stainless steel, fitted with the proper connections for plug & play installation. You can find the additional wiring harness extension here.
Hydraulic Pump Internal Gears BMW E46 M3 SMG II
The internal gears of the hydraulic pump are prone to mechanical wear, leading to a loss of pressure-building capability. Our kit comprises new gears and metal seals precisely crafted to meet the original specifications, thereby restoring the pump’s functionality. During the gear pump overhaul, we strongly advise replacing the seals, conveniently available here.
Set Clutch Parts BMW M5 M6 SMG III
Set of clutch parts contains:
- Two pressure plates
- Friction plate
- Release bearing
We sell only Sachs or LUK components, both are original suppliers for BMW.
Pressure Sensor BMW E46 M3 SMG II
The pressure sensor is located on the hydraulic unit of the M3 SMG II and measures the pressure of the hydraulic fluid.
Control Unit SMG III
The basic control unit (German “Steuergerät”, “SG”) is the main computer chip responsible for the control of the SMG III.
Please mind: the product photo is just a sample. The reference number of the delivered control unit may vary, the unit may need programming.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!