Wiring Harness for Relocation Kit BMW E46 M3 SMG II
126,05 €
plus Shipping Costs
Time to solve your SMG problems once and for all! With the Relocation Kit you can relocate the SMG hydraulic unit – away from the engine to the passenger side's 'drug bin'.
This offer includes a 170cm long wiring harness extension, equipped with the original plugs, automotive cables and conduit. The additional hydraulic hoses are available here.
- Condition: New
- Compatible vehicles: BMW E46 M3
In stock
Related Products
Complete Hydraulic Unit BMW E46 M3 SMG II
The refurbishment of the SMG II hydraulic pump includes intensive cleaning to remove old hydraulic oil as well as the installation of the following new parts:
- New hydraulic pump electric motor (sold here separately)
- New temperature sensor (sold here separately)
Compression Spring BMW E46 M3 SMG II
A broken compression spring can cause problems with the gear selection or adaption process.
Wiring Pin Release Tool BMW E46 M3 SMG II
Our pin extraction tool is essential for the replacement of the E46 M3 BMW SMG II pump motor. Designed specifically for safely extracting the motor’s pin contacts from the round connector, this tool ensures a precise and damage-free removal process. It is ideal for workshops and mechanics conducting routine maintenance on E46 M3 SMG II systems.
Pressure Accumulator BMW E46 M3 SMG II
Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with nitrogen gas.
The accumulator is responsible to store the pressure of the SMG system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime permanently.
Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.
Transmission Speed Sensor BMW E46 M3 SMG II
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
Clutch / Selection Solenoid Valve BMW E46 M3 SMG II
New clutch / selection solenoid valve for the E46 M3 SMG II. There are two of these flow-proportional solenoid valves on the hydraulic unit: one for clutch control and another one for gear selection. If one of these two valves fails, the SMG can no longer correctly open and close the clutch or shift gears.
Hydraulic Pump Internal Gears BMW E46 M3 SMG II
The internal gears of the hydraulic pump are prone to mechanical wear, leading to a loss of pressure-building capability. Our kit comprises new gears and metal seals precisely crafted to meet the original specifications, thereby restoring the pump’s functionality. During the gear pump overhaul, we strongly advise replacing the seals, conveniently available here.
Hydraulic Unit Pump Motor BMW E46 M3 SMG II
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a gear pump and the powering electric motor. Due to its location in a high temperature area, the motor suffers often from damage and is a common problem. Especially on hot days the car can drop out of gear or show the gearbox warning light (SMG cog light). Often the following codes appear in the error memory:
- 56 (0x38) Switching-on time of hydraulic unit
- 53 (0x35) low level of pressure reached HE
- 57 (0x39) Misuse of hydraulic unit
- 55 (0x37) Switching-on frequency of hydraulic unit
No worry – here is a solution for these problems!
We provide a new motor for the pump as a solution for various problems with the BMW M3 SMG II. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. Of course, the motor comes with a 12 month warranty.
The old motor can be replaced by the new one “plug&play“. The replacement motor is already equipped with the required pins and can be directly connected to the original wiring harness. For removing the old motor, you may need a release tool.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!