Solenoid Valve Seal Kit BMW E46 M3 SMG II
14,00 €
incl. 19% VAT plus Shipping Costs
- Seal kit for the solenoid valve of M3 SMG II
- Fits all of the four solenoid valves
- This kit is for one single valve
- Condition: New
- Compatible vehicles: BMW E46 M3
In stock
Related Products
Temperature sensor BMW E46 M3 SMG II
The temperature sensor is located on the hydraulic unit of the M3 SMG II and measures the temperature of the hydraulic fluid. Due to its location in a high temperature area, the sensors suffers often from damage and is a common problem.
Intake Manifold Clamps BMW E46 M3 SMG II
This set contains 6 clamps for the intake manifold of the S54 engine. To access the SMG hydraulic unit, the intake manifold must be removed. Unlike the original clamps, the parts we offer are made of a more resistant material and are reusable.
Hydraulic Unit Pump Motor BMW E46 M3 SMG II
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a gear pump and the powering electric motor. Due to its location in a high temperature area, the motor suffers often from damage and is a common problem. Especially on hot days the car can drop out of gear or show the gearbox warning light (SMG cog light). Often the following codes appear in the error memory:
- 56 (0x38) Switching-on time of hydraulic unit
- 53 (0x35) low level of pressure reached HE
- 57 (0x39) Misuse of hydraulic unit
- 55 (0x37) Switching-on frequency of hydraulic unit
No worry – here is a solution for these problems!
We provide a new motor for the pump as a solution for various problems with the BMW M3 SMG II. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. Of course, the motor comes with a 12 month warranty.
The old motor can be replaced by the new one “plug&play“. The replacement motor is already equipped with the required pins and can be directly connected to the original wiring harness. For removing the old motor, you may need a release tool.
Repair Kit Valve Plugs BMW E46 M3 SMG II
- New plugs for M3 SMG II solenoid valves
- Including cable and pins
- Ready for assembly
Complete Hydraulic unit BMW E46 M3 SMG II
The refurbishment of the SMG II hydraulic pump includes intensive cleaning to remove old hydraulic oil as well as the installation of the following new parts:
- New hydraulic pump electric motor (sold here separately)
- New temperature sensor (sold here separately)
Wiring Harness for Relocation Kit BMW E46 M3 SMG II
Time to solve your SMG problems once and for all! With the Relocation Kit you can relocate the SMG hydraulic unit – away from the engine to the passenger side's 'drug bin'.
This offer includes a 170cm long wiring harness extension, equipped with the original plugs, automotive cables and conduit. The additional hydraulic hoses are available here.
Pump reservoir seal BMW E46 M3 SMG II
New seal for the hydraulic pump plastic reservoir. The seal meets the requirements for use in the SMG hydraulic system.
Transmission speed sensor BMW E46 M3 SMG II
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!