Transmission Speed Sensor BMW E46 M3 SMG II
22,00 €
incl. 19% VAT plus Shipping Costs
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
- Compatible vehicles: BMW E46 M3
- Condition: New
In stock
Related Products

Hydraulic Unit Pump Motor BMW E46 M3 SMG II
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a gear pump and the powering electric motor. Due to its location in a high temperature area, the motor suffers often from damage and is a common problem. Especially on hot days the car can drop out of gear or show the gearbox warning light (SMG cog light). Often the following codes appear in the error memory:
- 56 (0x38) Switching-on time of hydraulic unit
- 53 (0x35) low level of pressure reached HE
- 57 (0x39) Misuse of hydraulic unit
- 55 (0x37) Switching-on frequency of hydraulic unit
No worry – here is a solution for these problems!
We provide a new motor for the pump as a solution for various problems with the BMW M3 SMG II. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. Of course, the motor comes with a 12 month warranty.
The old motor can be replaced by the new one “plug&play“. The replacement motor is already equipped with the required pins and can be directly connected to the original wiring harness. For removing the old motor, you may need a release tool.

Clutch / Selection Solenoid Valve BMW E46 M3 SMG II
New clutch / selection solenoid valve for the E46 M3 SMG II. There are two of these flow-proportional solenoid valves on the hydraulic unit: one for clutch control and another one for gear selection. If one of these two valves fails, the SMG can no longer correctly open and close the clutch or shift gears.

Compression Spring BMW E46 M3 SMG II
A broken compression spring can cause problems with the gear selection or adaption process.

Hydraulic Pump Seal Kit BMW E46 M3 SMG II
- Seal kit for the hydraulic pump of the M3 SMG II
- Damaged or hardened seals may cause the pump to be unable to build up pressure
- Precisely fitting seals made of high-quality material

Solenoid Valve Seal Kit BMW E46 M3 SMG II
- Seal kit for the solenoid valve of M3 SMG II
- Fits all of the four solenoid valves
- This kit is for one single valve

Repair Kit Valve Plugs BMW E46 M3 SMG II
- New plugs for M3 SMG II solenoid valves
- Including cable and pins
- Ready for assembly

Pump Reservoir Seal BMW E46 M3 SMG II
New seal for the hydraulic pump plastic reservoir. The seal meets the requirements for use in the SMG hydraulic system.

Pressure Accumulator BMW E46 M3 SMG II
Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with nitrogen gas.
The accumulator is responsible to store the pressure of the SMG system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime permanently.
Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!