Complete Hydraulic Unit BMW E46 M3 SMG II
799,00 €
plus Shipping Costs
The refurbishment of the SMG II hydraulic pump includes intensive cleaning to remove old hydraulic oil as well as the installation of the following new parts:
- New hydraulic pump electric motor (sold here separately)
- New temperature sensor (sold here separately)
- Compatible vehicles: BMW E46 M3
- Reference numbers: BMW 21532229715, 21532282257
- Condition: Refurbished
Out of stock
Related Products
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
Pump Relay BMW E46 M3 SMG II
The pump relay is responsible to turn on / off the hydraulic pump of the SMG system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the clutch or change gears.
Pictures shown are for illustration purpose only. The relay supplied may have a different color.
Intake Manifold Clamps BMW E46 M3 SMG II
This set contains 6 clamps for the intake manifold of the S54 engine. To access the SMG hydraulic unit, the intake manifold must be removed. Unlike the original clamps, the parts we offer are made of a more resistant material and are reusable.
Control Unit M3 SMG II
The transmission control unit (ECU / TCU) is the main computer responsible for the control of the M3 SMG II.
Pump Reservoir Seal BMW E46 M3 SMG II
New seal for the hydraulic pump plastic reservoir. The seal meets the requirements for use in the SMG hydraulic system.
Pressure Sensor BMW E46 M3 SMG II
The pressure sensor is located on the hydraulic unit of the M3 SMG II and measures the pressure of the hydraulic fluid.
Hydraulic Unit Pump Motor BMW E46 M3 SMG II
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a gear pump and the powering electric motor. Due to its location in a high temperature area, the motor suffers often from damage and is a common problem. Especially on hot days the car can drop out of gear or show the gearbox warning light (SMG cog light). Often the following codes appear in the error memory:
- 56 (0x38) Switching-on time of hydraulic unit
- 53 (0x35) low level of pressure reached HE
- 57 (0x39) Misuse of hydraulic unit
- 55 (0x37) Switching-on frequency of hydraulic unit
No worry – here is a solution for these problems!
We provide a new motor for the pump as a solution for various problems with the BMW M3 SMG II. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. Of course, the motor comes with a 12 month warranty.
The old motor can be replaced by the new one “plug&play“. The replacement motor is already equipped with the required pins and can be directly connected to the original wiring harness. For removing the old motor, you may need a release tool.
Repair Kit Valve Plugs BMW E46 M3 SMG II
- New plugs for M3 SMG II solenoid valves
- Including cable and pins
- Ready for assembly
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!