Wiring Pin Release Tool BMW E46 M3 SMG II
55,00 €
incl. 19% VAT plus Shipping Costs
Our pin extraction tool is essential for the replacement of the E46 M3 BMW SMG II pump motor. Designed specifically for safely extracting the motor’s pin contacts from the round connector, this tool ensures a precise and damage-free removal process. It is ideal for workshops and mechanics conducting routine maintenance on E46 M3 SMG II systems.
- Condition: New
- Compatible vehicles: BMW E46 M3
In stock
Related Products
Control Unit BMW E46 M3 SMG II
The transmission control unit (ECU / TCU) is the main computer responsible for the control of the M3 SMG II.
Please note: The product photo is for illustrative purposes only. Please ask us which specific part number we have in stock before purchase. Some ECUs need to be coded or flashed after installation.
Temperature Sensor BMW E46 M3 SMG II
The temperature sensor is located on the hydraulic unit of the M3 SMG II and measures the temperature of the hydraulic fluid. Due to its location in a high-temperature area, the sensor is often damaged, which is a common problem.
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 °C to over 130 °C system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
Transmission Speed Sensor BMW E46 M3 SMG II
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, properly adjusting the shaft speeds before engaging and disengaging the different gears.
Repair Kit Valve Plugs BMW E46 M3 SMG II
- New plugs for M3 SMG II solenoid valves
- Including cable and pins
- Ready for assembly
Solenoid Valve Seal Kit BMW E46 M3 SMG II
- Seal kit for the solenoid valves of M3 SMG II
- Includes seals for all four solenoid valves
- Solution to eliminate internal leaks
Hydraulic Unit Pump Motor BMW E46 M3 SMG II
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a gear pump and the powering electric motor. Due to its location in a high-temperature area, the motor is often damaged, which is a common problem. Especially on hot days the car can drop out of gear or show the gearbox warning light (SMG cog light). Often the following codes appear in the error memory:
- 56 (0x38) Switching-on time of hydraulic unit
- 53 (0x35) low level of pressure reached HE
- 57 (0x39) Misuse of hydraulic unit
- 55 (0x37) Switching-on frequency of hydraulic unit
No worries – here is a solution for these problems!
We provide a new motor for the pump as a solution for various problems with the BMW M3 SMG II. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. Of course, the motor comes with a 12 month warranty.
The old motor can be replaced by the new one “plug&play“. The replacement motor is already equipped with the required pins and can be directly connected to the original wiring harness. To remove the pins of the old motor from the round connector, you need a release tool (available separately: Wiring Pin Release Tool BMW E46 M3 SMG II).
Pressure Sensor BMW E46 M3 SMG II
The pressure sensor is located on the hydraulic unit of the M3 SMG II and measures the pressure of the hydraulic fluid.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!