Pressure Accumulator BMW E60 M5 E63 M6 SMG III
310,00 €
incl. 19% VAT plus Shipping Costs
The pressure accumulator is responsible to store the pressure of the hydraulic system for later access by the actuators. This piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a Nitrogen gas filling which creates the counterpressure. Both cells are separated by a moving piston. Typical symptoms of a faulty pressure accumulator are frequent and short pump cycles. If there is no more preload pressure left in the accumulator, the pump runs every few seconds, which ultimately leads to a consequential damage of the pump motor. Along with the pump motor, a faulty pressure accumulator is one of the most common causes of pressure build-up issues and is one of the few wear parts in the system that should be regularly checked and replaced if necessary.
The replacement part we offer is a brand-new OE upgrade with improved internal piston seals, resulting in significantly increased durability.
- Condition: New
- Compatible vehicles: BMW E60 M5, BMW E61 M5, BMW E63 M6, BMW E64 M6
- Reference numbers: BMW 21542282998, BMW 23012283744, BMW 23017838933
In stock
Related Products
Pump Relay BMW E60 M5 E63 M6 SMG III
The pump relay is responsible to turn on / off the hydraulic pump of the SMG system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the clutch or change gears.
Pictures shown are for illustration purpose only. The relay in your car may have a different color.
Pump Motor BMW E60 M5 E63 M6 SMG III
This pump motor for the M5 and M6 SMG III is a high-quality replacement part, made in Germany, and specifically designed for the extreme demands of the SMG system. It is ideal for demanding drivers with a sporty driving style that involves frequent gear shifts and high stress on the system. The pump motor comes with the original connector, making it a plug & play replacement for the original part. The set includes not only the pump motor but also all the parts needed for the replacement:
- 4 seals
- 6 screws
- 4 cable ties
- 1 stainless steel clamp
- 1 metal coupling that connects the motor shaft to the gear pump
- 1 pack of lubricating grease
Temperature Sensor BMW E60 M5 E63 M6 SMG III
The temperature sensor is located on the hydraulic unit of the M5 / M6 SMG III and measures the temperature of the hydraulic fluid. Due to its location in a high temperature area, the sensors suffers often from damage and is a common problem.
Reservoir Filler Plug BMW E60 M5 E63 M6 SMG III
New and original filler plug for the hydraulic fluid reservoir
Banjo Bolts BMW E60 M5 E63 M6 SMG III
This set contains 3 new banjo bolts and 6 seals.
Hydraulic Pump Internal Gears BMW E60 M5 E63 M6 SMG III
The internal gears of the hydraulic pump tend to wear mechanically and as a result the pump can no longer build up pressure. Our set includes new gears and metal seals that exactly match the original specifications and restore the function of the pump. In the process of overhauling the gear pump, we also recommend replacing the seals, which you can find here.
Synchronizer Set BMW E60 M5 E63 M6 SMG III
This set includes brand-new synchronizer rings for the M5 / M6 SMG III transmission. These are genuine Getrag parts, ensuring perfect fitment and factory-level performance.
Selector Rod Piston Seals BMW E60 M5 E63 M6 SMG III
This set includes all 8 piston seals for the selector rods located on top of the gearbox. The seals are made from a higher quality and more durable material than the original ones.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!