Clutch Valve 6-speed SMG
302,52 €
plus Shipping Costs
The clutch solenoid valve (marked with “QPV”) is responsible for the clutch actuation of the SMG system. A faulty valve can cause problems while engaging the clutch (for example shuttering) and in consequence the car refuses to change gears.
This is an original and new Magneti Marelli spare part.
- Condition: New
- Reference numbers: BMW 23427567719, 23 42 7 567 719
- Compatible vehicles: BMW E46, BMW E60, BMW E63, BMW Z4 E85
In stock
Related Products
Shift Valve 6-speed SMG
The shift solenoid valves (marked with “PPV”) are responsible for changing the gears of the SMG system. There are two of these valves on the hydraulic unit. Together with the selection valve, they operate the shift actuator. If one of the valves is faulty, the car will refuse to go into one or more gears.
This is an original and new Magneti Marelli spare part.
Control Unit 6-speed SMG
The transmission control unit (ECU / TCU) is the main computer responsible for the control of the 6-speed SMG.
Please mind: The product photo is for illustrative purposes only. Please ask us which specific part number we have in stock before purchase. There are various part numbers of this ECU, some of which are compatible with each other. Some ECUs need to be coded or flashed after installation. Checking the compatibility is your responsibility, a return is not possible.
Pressure Accumulator 6-speed SMG
Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with new nitrogen gas.
The accumulator is responsible to store the pressure of the SMG system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime permanently.
Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.
Transmission Speed Sensor 5- / 6-speed SMG
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
Pump Motor 6-speed SMG
The pump motor drives the gear pump, which generates the pressure for the SMG transmission. Both parts together form the hydraulic pump. Without hydraulic pressure, the transmission cannot perform any action – neither change gears, nor operate the clutch. Therefore, the hydraulic pump is the most important component in the system.
In most cases, it is sufficient to replace only the electric motor, as this is a wearing part. The gear pump fails only very rarely. Another advantage is that when only the pump motor is changed, the hydraulic system does not need to be bled afterwards, unless it has been opened.
We sell an original, brand new Magneti Marelli spare part – the same part you would get from BMW.
Set Clutch Parts 6-speed SMG (3.0)
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
Only applicable for M54 engine. If you are unsure, please contact us before purchasing.
We sell only Sachs or LUK components, both are original supplier for BMW.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!