Selection Sensor 6-speed SMG
110,00 €
plus Shipping Costs
This sensor is located on top of the gearbox and responsible to monitor the shift process.
- Condition: Used
- Reference numbers: BMW 23427507168
- Compatible vehicles: BMW E46, BMW E60, BMW E63, BMW Z4 E85
Out of stock
Related Products
![Shift Solenoid Valve 6-speed SMG](https://www.smgsociety.com/wp-content/uploads/2017/03/qpvppv-300x300.jpg)
Shift Solenoid Valve 6-speed SMG
The shift solenoid valves (marked ‘PPV’) are responsible for engaging the gears in the SMG gearbox. There are two of these pressure-proportional valves mounted on the hydraulic unit. Working in conjunction with the selection valve, they operate the shift actuator. If either valve is faulty, the car may be unable to engage one or more gears.
![Selection Solenoid Valve 6-speed SMG](https://www.smgsociety.com/wp-content/uploads/2018/06/195722-300x300.jpg)
Selection Solenoid Valve 6-speed SMG
The selection solenoid valve (marked ‘OOV’) is responsible for moving the gear selector sideways to select gear pairs. If this two-way on/off valve fails, the car may be unable to engage one or more gears. Note: the product photo is for illustrative purposes only, the valve is supplied without the Magneti Marelli sticker.
![Set Clutch Parts 6-speed SMG (3.0)](https://www.smgsociety.com/wp-content/uploads/2017/04/kupplungssatz-300x300.jpg)
Set Clutch Parts 6-speed SMG (3.0)
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
Only applicable for M54 engine. If you are unsure, please contact us before purchasing.
We sell only Sachs or LUK components, both are original supplier for BMW.
![Pump Motor 6-speed SMG](https://www.smgsociety.com/wp-content/uploads/2017/04/SMGPumpe2-300x300.jpg)
Pump Motor 6-speed SMG
The pump motor drives the gear pump, which generates the pressure for the SMG transmission. Both parts together form the hydraulic pump. Without hydraulic pressure, the transmission cannot perform any action – neither change gears, nor operate the clutch. Therefore, the hydraulic pump is the most important component in the system.
In most cases, it is sufficient to replace only the electric motor, as this is a wearing part. The gear pump fails only very rarely. Another advantage is that when only the pump motor is changed, the hydraulic system does not need to be bled afterwards, unless it has been opened.
We sell an original, brand new Magneti Marelli spare part – the same part you would get from BMW.
![Transmission Speed Sensor 5- / 6-speed SMG](https://www.smgsociety.com/wp-content/uploads/2022/08/getriebdrehz275-300x300.jpg)
Transmission Speed Sensor 5- / 6-speed SMG
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
![Hydraulic Line Seal Kit 6-speed SMG](https://www.smgsociety.com/wp-content/uploads/2020/04/oringe_smg-300x300.jpg)
Hydraulic Line Seal Kit 6-speed SMG
- New seals for the hydraulic lines of the SMG
- Including 9 o-rings
- Material of the seals suitable for SMG requirements
![Pressure Sensor 6-speed SMG](https://www.smgsociety.com/wp-content/uploads/2018/06/OPS05-300x300.jpg)
Pressure Sensor 6-speed SMG
The pressure sensor measures the hydraulic pressure in the accumulator. Based on this value, the SMG enables and disables the hydraulic pump to fill up pressure. This is an original and brand-new spare part.
![Set Clutch Parts 6-speed SMG (4.0, 4.5, 5.0)](https://www.smgsociety.com/wp-content/uploads/2017/04/kupplungssatz-300x300.jpg)
Set Clutch Parts 6-speed SMG (4.0, 4.5, 5.0)
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
We sell only Sachs or LUK components, both are original supplier for BMW.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!