Clutch / Selection Solenoid Valve BMW E46 M3 SMG II
New clutch / selection solenoid valve for the E46 M3 SMG II. There are two of these flow-proportional solenoid valves on the hydraulic unit: one for clutch control and another one for gear selection. If one of these two valves fails, the SMG can no longer correctly open and close the clutch or shift gears.
Complete Hydraulic Unit BMW E46 M3 SMG II
The refurbishment of the SMG II hydraulic pump includes intensive cleaning to remove old hydraulic oil as well as the installation of the following new parts:
- New hydraulic pump electric motor (sold here separately)
- New temperature sensor (sold here separately)
Hydraulic Pump Seal Kit BMW E46 M3 SMG II
- Seal kit for the hydraulic pump of the M3 SMG II
- Damaged or hardened seals may cause the pump to be unable to build up pressure
- Precisely fitting seals made of high-quality material
Hydraulic Unit Pump Motor BMW E46 M3 SMG II
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a gear pump and the powering electric motor. Due to its location in a high temperature area, the motor suffers often from damage and is a common problem. Especially on hot days the car can drop out of gear or show the gearbox warning light (SMG cog light). Often the following codes appear in the error memory:
- 56 (0x38) Switching-on time of hydraulic unit
- 53 (0x35) low level of pressure reached HE
- 57 (0x39) Misuse of hydraulic unit
- 55 (0x37) Switching-on frequency of hydraulic unit
No worry – here is a solution for these problems!
We provide a new motor for the pump as a solution for various problems with the BMW M3 SMG II. The motor meets highest expectations of quality and enables a sporty style of driving with frequent shifting. Of course, the motor comes with a 12 month warranty.
The old motor can be replaced by the new one “plug&play“. The replacement motor is already equipped with the required pins and can be directly connected to the original wiring harness. For removing the old motor, you may need a release tool.
Pressure Sensor BMW E46 M3 SMG II
The pressure sensor is located on the hydraulic unit of the M3 SMG II and measures the pressure of the hydraulic fluid.
Pump Reservoir Seal BMW E46 M3 SMG II
New seal for the hydraulic pump plastic reservoir. The seal meets the requirements for use in the SMG hydraulic system.
Temperature Sensor BMW E46 M3 SMG II
The temperature sensor is located on the hydraulic unit of the M3 SMG II and measures the temperature of the hydraulic fluid. Due to its location in a high temperature area, the sensors suffers often from damage and is a common problem.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!