Clutch Solenoid Valve BMW E60 M5 E63 M6 SMG III
230,00 €
incl. 19% VAT plus Shipping Costs
The clutch solenoid valve is located next to the pump at the driver’s side of the gearbox and is responsible for the clutch actuation of the SMG system. A faulty valve can cause problems while engaging the clutch (for example shuddering) and in consequence the car refuses to change gears. This is a factory-new spare part.
- Condition: New
- Reference numbers: BMW 23017845630
- Compatible vehicles: BMW E60 M5, BMW E61 M5, BMW E63 M6, BMW E64 M6
Out of stock
Related Products
Transmission Speed Sensor BMW E60 M5 E63 M6 SMG III
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, properly adjusting the shaft speeds before engaging and disengaging the different gears.
Pressure Sensor BMW E60 M5 E63 M6 SMG III
The pressure sensor measures the hydraulic pressure in the accumulator. Based on this value, the SMG enables and disables the hydraulic pump to fill up pressure. This is a brand-new original part.
Gear Position Sensor Repair Harness BMW E60 M5 E63 M6 SMG III
New wiring harness to repair the gear position sensor strip located on top of the gearbox. Roughened or frayed cables are a common problem with this wiring harness. When the insulation of the cables is broken, short circuits occur, which lead to various SMG malfunctions and error messages (for example 4F80, 4F82, 4F85). Our wiring harness repair kit is supplied with a ready-made original BMW connector.
Hydraulic Pump Internal Gears BMW E60 M5 E63 M6 SMG III
The internal gears of the hydraulic pump tend to wear mechanically and as a result the pump can no longer build up pressure. Our set includes new gears and metal seals that exactly match the original specifications and restore the function of the pump. In the process of overhauling the gear pump, we also recommend replacing the seals, which you can find here.
VANOS Timing Solenoid Valve BMW E60 M5 E63 M6
New solenoid valve for M5 / M6 VANOS system. There are 4 of these valves on the VANOS unit.
- Applies to SMG and manual gearbox
- Comes with a new o-ring for mounting.
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 °C to over 130 °C system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
Pump Motor BMW E60 M5 E63 M6 SMG III
This pump motor for the M5 and M6 SMG III is a high-quality replacement part, made in Germany, and specifically designed for the extreme demands of the SMG system. It is ideal for demanding drivers with a sporty driving style that involves frequent gear shifts and high stress on the system. The pump motor comes with the original connector, making it a plug & play replacement for the original part. The set includes not only the pump motor but also all the parts needed for the replacement:
- 4 seals
- 6 screws
- 4 cable ties
- 1 stainless steel clamp
- 1 metal coupling that connects the motor shaft to the gear pump
- 1 pack of lubricating grease
Temperature Sensor BMW E60 M5 E63 M6 SMG III
The temperature sensor is located on the hydraulic unit of the M5 / M6 SMG III and measures the temperature of the hydraulic fluid. Due to its location in a high-temperature area, the sensor is often damaged, which is a common problem.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!