Clutch solenoid valve BMW E60 M5 E63 M6 SMG III
The clutch solenoid valve is located next to the pump at the driver’s side of the gearbox and is responsible for the clutch actuation of the SMG system. A faulty valve can cause problems while engaging the clutch (for example shuttering) and in consequence the car refuses to change gears. This is a factory-new spare part.
Control unit SMG III
The basic control unit (German “Steuergerät”, “SG”) is the main computer chip responsible for the control of the SMG III.
Please mind: the product photo is just a sample. The reference number of the delivered control unit may vary, the unit may need programming.
Gear position sensor repair harness BMW E60 M5 E63 M6 SMG III
New wiring harness to repair the gear position sensor strip located on top of the gearbox. Roughened or frayed cables are a common problem with this wiring harness. When the insulation of the cables is broken, short circuits occur, which lead to various SMG malfunctions and error messages (for example 4F80, 4F82, 4F85). Our wiring harness repair kit is supplied with a ready-made original BMW connector.
Hydraulic Pump Seal Kit BMW E60 M5 E63 M6 SMG III
- Seal kit for the hydraulic pump of the M5 / M6 SMG III
- Damaged or hardened seals may cause the pump to be unable to build up pressure
- Precisely fitting seals made of high-quality material
Pressure accumulator BMW E60 M5 E63 M6 SMG III
Our refurbished pressure accumulators are equipped with a filling valve and freshly filled with nitrogen gas.
The accumulator is responsible to store the pressure of the SMG system for later access by the actuators. The piston type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a moving piston. A broken accumulator causes the pump to prime permanently.
Important: You will need to pay a core charge (deposit) of 300,00€ which will be refunded when you return your used part. You can learn more here. This is a repair service (no purchase of a product). Our terms and conditions and the right of withdrawal for the order of services apply.
Pressure sensor BMW E60 M5 E63 M6 SMG III
The pressure sensor measures the hydraulic pressure in the accumulator. Based on this value, the SMG enables and disables the hydraulic pump to fill up pressure. This is a brand-new original part.
Pump Motor BMW E60 M5 E63 M6 SMG III
New SMG III pump motor for BMW M5 and M6
- Equipped with original plug
- Perfect for sporty driving style & frequent shifts
- Hight quality motor
- 12-month warranty included
The pump supplies the hydraulic pressure for the different consumers (actuators) of the SMG and stores it in the pressure accumulator. The pump consists of a small gear pump and an electric motor. If the pump motor fails, pressure is lacking in the system and the SMG cannot perform any clutch operations or gear changes.
Pump relay BMW E60 M5 E63 M6 SMG III
The pump relay is responsible to turn on / off the hydraulic pump of the SMG system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the clutch or change gears.
Pictures shown are for illustration purpose only. The relay in your car may have a different color.
Reservoir filler plug BMW E60 M5 E63 M6 SMG III
New and original filler plug for the hydraulic fluid reservoir
Set clutch parts BMW M5 M6 SMG III
Set of clutch parts contains:
- Pressure plate
- Friction plate
- Release bearing
We sell only Sachs or LUK components, both are original supplier for BMW.
Solenoid Valve Seal Kit BMW E60 M5 E63 M6 SMG III
- Seal kit for the solenoid valves of the M5 / M6 SMG III
- Includes seals for all 7 valves
- High quality seal material
Temperature sensor BMW E60 M5 E63 M6 SMG III
The temperature sensor is located on the hydraulic unit of the M5 / M6 SMG III and measures the temperature of the hydraulic fluid. Due to its location in a high temperature area, the sensors suffers often from damage and is a common problem.
Transmission speed sensor BMW E60 M5 E63 M6 SMG III
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the SMG control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
VANOS Timing Solenoid Valve BMW E60 M5 E63 M6
New solenoid valve for M5 / M6 VANOS system. There are 4 of these valves on the VANOS unit.
- Applies to SMG and manual gearbox
- Comes with a new o-ring for mounting.
Your wanted part is not listed in the shop? Maybe we can repair it. Have a look at our repairs section!